GEOTUBE®

Reducing water content, retaining solids and harmful substances, and minimizing treatment costs

The treatment and dewatering of sludge, tailings, and other liquid waste streams is a continuous operational challenge. Traditional geotextile tubes often remain too moist, while mechanical systems are capital-intensive, prone to failure, and lack sufficient capacity. This results in a wetter mass, meaning more material to be disposed of and transported, a larger space requirement on the treatment site, and higher material consumption.

GEOTUBE® solves these challenges by combining simple, passive dewatering with proven performance in solids retention, accelerated drying, and reduced labor requirements. Capable of reducing volume by up to 90 percent, GEOTUBE dewatering units enable efficient dewatering and consolidation—without additional labor or space requirements.

Dewatering and Consolidation in a Single Step

GEOTUBE dewatering units are manufactured from high-strength geotextile designed to retain solids while allowing water to escape. Sludge is pumped or dredged into the tube, and polymers are added to bind fine particles and accelerate water release. The filtrate drains through the fabric, while solids and harmful substances are retained inside the tube. We have also achieved excellent results with soluble metals and nutrients using the right additives.

Over time, consolidation and drying continue through capillary action and consolidation. GEOTUBE dewatering containers can be customized to fit the available space and stacked to optimize space. Once dewatering is complete, the solids can be removed for reuse or disposal, or the tube can be sealed in place.

We efficiently treat watery sediments, sludge, liquid waste, tailings, and mining waste. We separate solids from liquids. Our clients include the mining industry, waste management, paper and pulp industry, steel industry, fertilizer industry, as well as municipalities, cities, and ports in Finland and Sweden.

Wastewater ponds, tailings, mine ponds and scale pits, sedimentation and stormwater ponds, areas in front of dams, lakes, and rivers or similar water bodies will eventually fill up with sludge. Suction dredging or pumping is best suited for removing watery sludge. Often, the sludge is highly watery and also contains harmful substances. With our solutions, watery sludge can be processed into a solid form, and its volume is significantly reduced. The drainage water removed during the treatment can often be treated so that it can be discharged into the terrain or back into the process.

We help design and select the best method for sludge removal and treatment. We model the solution using site-specific samples in our laboratory to choose the best option. In sludge treatment, we use precipitants or other additives to help retain heavy metals or other harmful substances.